Multispectral Lighting Systems
Standard Multispectral Lighting System
The Multispectral Lighting System (MLS) is designed to illuminate test charts of up to a width of 2 meters with more than 90% uniformity for image analysis. This new lighting system uses 16 LED channels that can be fully controlled independently and can automatically fit a spectrum with a closed loop. (Some standard spectra are pre-calibrated.) The LED channels are DC-driven, ensuring flicker-free light, although LED flicker can be activated. This lighting system can reach very low light (down to 0.1 lux with 10% precision).
An illuminance feedback loop automatically stabilizes light levels, and the entire system is computer-controlled so that you can program your own lighting scenarios, including the color temperature. The software ensures perfect repeatability of your illumination conditions.
Sunlight-Near Infrared Multispectral Lighting System
This lighting system has the same characteristics as the standard MLS product, but comes with 4 additional LED channels in near-infrared (NIR) and one additional LED channel in visible light. This creates an unprecedented ability to mimic daylight by reaching light levels up to 50K lux with a spectrum that goes through the full range of visible light and NIR.
- Size: 785 x 203 x 1590 mm
- Material: Aluminum
- Weight: 35 kg
- From 0.1 to 50 000 lux
- Spectrum: 360–980 nm
- Flicker mode: 50–1000 Hz (50% duty cycle)
- Ethernet connection
- 100-240 V, 50-60 Hz
- max consumption : 2500 W
- Flicker-free (DC-driven)
- Closed loop (light level and spectrum)
- Computer control & API software
- Flicker mode (independent for each side)
- Short raise time (<30 ms)
- Daylight (0.1 to 50K lux), IR (700 to 980 nm)
- Reference: MLS_001 & MLS_SUNIR_001